The following information is intended to assist architects, contractors and home owners in planning for dumbwaiter that meets the requirements of ASME A17.1-2000, Part 7.

We strongly recommend you contact the codes authority having jurisdiction in the area(s) where the dumbwaiter will be installed. Become familiar with all requirements governing the installation. It is extremely important for you to know and adhere to all regulations.

Elevator configurations and dimensions are in accordance with our interpretation of the standards set forth by ASME A17.1-2000, Part 7. Please consult Summit Lifts or an authorized dealer in your area for more specific information pertaining to your project, including any deviation between referenced standards and those of any local codes or lows. Always contact codes authorities for any variation to standards.

Hoistway Construction Notes

• Minimum overhead clearance inside the hoistway is 48" above the upper level sill height. The typical sill height is 36" above the floor level.
• Hoistway sizes reflect running and access clearances only. Consult your local authority to assure compliance with state local codes.
• Hoistway walls to be plumb and square.
• Hoistway door provided by others.
• Machine access door provided by others.
• Guide Rail Backing Construction Details
  

Recommended Guide Rail Backing

• Use two continuous 4 x 4 posts as backing for the guide rail attachment.
• Guide rail backing must be tied to a horizontal structural member (header or floor plate) at top, bottom and maximum of 10' between.
• Location varies depending on application. Request application specific drawings before beginning construction.