SILVER CROSS®
Established in 1993, SILVER CROSS® is now represented by over 100 US and Canadian bricks and mortar locations covering 80% of North America. Over 100,000 clients served.
Call Deborah Baker for a self installed stair lift, dumbwaiter, walk-in tub or ceiling lift.
1-800-572-9310
Fax: 905-335-1612
dbaker@silvercross.com
-------------------------------
Over 100 customer comments....
"I am sending you this note to thank you for all your assistance you provided while I was searching for the most appropriate device to help my parents safely navigate their staircase. I very much appreciate all of your follow up calls. I was amazed on how knowledgeable, thoughtful and helpful you are when it comes to helping a client select the most appropriate device! Thanks to you, my parents now have the full use of their home and the freedom to come and go as they please. They are thrilled! Again, I thank you both." Sincerely, Paul B. Michigan.
|
|
| |
Dumbwaiter General Specifications
- Car interior dimensions - 20"wide x 20"deep x 30"high - custom sizes available up to 32" x 32" x 42"
- Finish - Car interior and doors feature a durable ivory powder coat finish
- Capacity - 100 lbs. - available up to 150 lbs.
- Travel - Up to 28'
- Track - Extruded aluminum
- Stops - 2 or 3
- Speed 20 feet per minute
- Hoistway door interlocks - G.A.L. interlocks or electromechanical interlocks
- Controls - 2 Call-Send controls, 24V
- Cable - Aircraft cable rated at 1,800 lb. breaking strength
- Motor - 1/3 hp, 90 VDC motor
- Warranty - 2 year warranty on parts and 5 years on the drive train
- Electric supply - 115 VAC grounded outlet
- Designed to meet ANSI standards
Dumbwaiter Planning Guide
The following information is intended to assist architects, contractors and home owners in planning for dumbwaiter that meets the requirements of ASME A17.1-2000, Part 7.
We strongly recommend you contact the codes authority having jurisdiction in the area(s) where the dumbwaiter will be installed. Become familiar with all requirements governing the installation. It is extremely important for you to know and adhere to all regulations.
Elevator configurations and dimensions are in accordance with our interpretation of the standards set forth by ASME A17.1-2000, Part 7. Please consult Summit Lifts or an authorized dealer in your area for more specific information pertaining to your project, including any deviation between referenced standards and those of any local codes or lows. Always contact codes authorities for any variation to standards.
Hoistway Construction Notes
- Minimum overhead clearance inside the hoistway is 48" above the upper level sill height. The typical sill height is 36" above the floor level.
- Hoistway sizes reflect running and access clearances only. Consult your local authority to assure compliance with state local codes.
- Hoistway walls to be plumb and square.
- Hoistway door provided by others.
- Machine access door provided by others.
- Guide Rail Backing Construction Details
Recommended Guide Rail Backing
- Use two continuous 4 x 4 posts as backing for the guide rail attachment.
- Guide rail backing must be tied to a horizontal structural member (header or floor plate) at top, bottom and maximum of 10' between.
- Location varies depending on application. Request application specific drawings before beginning construction.
|
|
| |
|
|
|
----------------------
Click Here for Dumbwaiter Brochure
--------------------
Bob Harvey CEO of SILVER CROSS Video Clip on Dumbwaiters
|
